RATTMMOTOR CNC Router Motor 0.8KW 800W Water Cooled Spindle Motor 110V
4A ER11 400HZ 24000RMP for CNC Router Engraver Milling MachineUSD $98.03
Condition : NEW
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
- ✅【Simple Introduction】This is a 110V 0.8KW water-cooled 4A Φ 65x158mm spindle motor come with a ER11 nut and collet. Frequency is 400HZ, 0.005mm precision tapered bore and runout off is less than 0.01mm. It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine.
- ✅【How to Wire The Spindle Motor】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected with inverter's port U, V, W respectively. Number 4 does not require wiring.
- ✅【Speed of The Spindle Motor】0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the spindle only can rotate clockwise but not counterclockwise.
- ✅【Advantages】 P4 high speed bearings, dynamic balance, high-precison nut and chuck, it can better ensure the accuracy of the spindle. It's not easy to oxidize and rust with the water-cooling design, and pure copper galvanized nozzle.
- ✅【About The Design dvantages of The Spindle Motor】The design of the dust-proof cover on the front of the spindle and the use of stainless steel body can effectively prevent dust, water and rust.
Price type
IN STOCK
OUT STOCK
.
